← All work

05 / Studio planning

StudioCraft

Fieldhaus

Role
Designer, Fieldhaus
Scope
Product design and front end: the landing page, the six-step setup, and the plan with its interactive signal flow diagram and exports
Outcome
Live, with a public sample plan.

The problem

Home studios grow one purchase at a time. By the time there is an interface, two controllers, a pair of monitors and a couple of microphones, nobody has written down what plugs into what, or which cables are still missing.

The details are easy to miss on a first setup: a balanced line, phantom power for a condenser microphone, a preamp booster for a quiet dynamic one.

How it was built

I wrote the plan's structure as plain questions a person setting up a room actually asks, what am I working with, how does it all connect, which cables do I need, and gave each one a tab.

  1. 01

    Pick a space

    The setup starts with six space types: music studio, home office, home theater, workshop or garage, gaming setup, or a custom mix. A progress bar shows the six steps ahead.

    The first of six setup steps.
  2. 02

    What you're working with

    The plan opens on the equipment, each piece with its category and its ports as tags: USB-C, Thunderbolt 4, XLR, quarter-inch TRS, MIDI. The sample plan lists fourteen pieces.

    Every device, with its ports.
  3. 03

    How it all connects

    A signal flow diagram draws every device as a node and every cable as a line colored by type, with a legend. Nodes drag, the canvas zooms, and a layout menu offers a stacked arrangement.

    How it all connects, in the sample plan.
  4. 04

    Every cable, mapped

    A checklist of each cable type, how many and what each connects. In the sample, four USB-C cables serve the interface, Push 3, Digitakt II and MiniFreak, and four XLR cables serve the microphones with one spare.

    Every cable, with what it connects.
  5. 05

    Step by step

    Eight numbered steps open to specifics. The microphone step in the sample routes the SM7B through a Cloudlifter into input 1, puts the TLM 103 on input 2 with +48V phantom power, and sets a gain target of -18 dBFS.

    Eight setup steps.
  6. 06

    Put it to work

    Six suggested workflows, from beat production to live performance prep, each naming gear from the plan, and exports to PDF, Markdown or HTML.

    Workflows and exports.

The solution

A guided setup that ends in a plan with six views: equipment, signal flow, cables, software, setup steps and workflows.

An interactive signal flow diagram with a cable-type legend, a share action, and exports of the whole plan to PDF, Markdown and HTML.

Decisions along the way

  • Sections named as plain phrases

    Plan tabs read How it all connects and Every cable, mapped, where a tool might say Diagram and Bill of materials.

  • Ports as tags

    Every device lists its connectors, so a missing cable shows up before the diagram is drawn.

  • Color by cable type

    Lines in the diagram are colored by cable type, USB-C, USB-A, Thunderbolt 4, XLR and quarter-inch TRS, with a legend at the top.

  • Plans leave the app

    Every plan exports to PDF, Markdown and HTML, so it can be printed for the desk or kept with other notes.

What I delivered

  • Landing page with five space types
  • Six-step setup
  • Equipment view with port tags
  • Interactive signal flow diagram
  • Cable checklist, software list, setup guide and workflows
  • PDF, Markdown and HTML export

Value added

  • For a home studio

    One plan that says what plugs into what, and a list of the cables to buy.

  • For setup day

    Numbered steps with real settings, down to phantom power and a gain target.

By the numbers

The sample plan's cable checklist

Cables listed for Oakwood Creative Studio, StudioCraft's public sample plan. 21 in all.

USB-C to USB-C4
XLR male to female4
1/4" TRS balanced4
USB-A to USB-B2
1/4" TRS to 1/4" TRS2
5-pin MIDI2
Power strips2
1/4" TRS extension1
View as table
ItemValueNote
USB-C to USB-C4Apollo Twin X, Push 3, Digitakt II, MiniFreak
XLR male to female4SM7B (two, via Cloudlifter), TLM 103, spare
1/4" TRS balanced4Monitor L/R, Digitakt stereo out
USB-A to USB-B2Launchkey 61, Komplete Kontrol S61
1/4" TRS to 1/4" TRS2MiniFreak stereo out to interface
5-pin MIDI2Digitakt MIDI, backup
Power strips2Surge-protected
1/4" TRS extension1Headphone extension at desk

Source: studiocraft.io, public sample plan (sample data) (opens in a new tab)

The result

Live at studiocraft.io, with a public sample plan for a music studio. The plan in these captures is that sample, not anyone's real room.

Results

  • 6views in every plan
  • 21cables in the sample plan's checklist
  • 8setup steps in the sample plan

What I took from it

The signal flow diagram is the screen people will open a plan for, and the hardest one to get right: with fourteen devices, labels start to collide where cables cross. Plain-language section names did more for clarity than any visual treatment; the diagram's layout is where the next round of design belongs.

Background

The cable checklist rests on a basic distinction in audio wiring. As Yamaha's primer on interconnections explains, a balanced cable adds a third conductor carrying an inverted copy of the signal, which is used to reject interference, so balanced lines can run upwards of 150 feet, while unbalanced runs are best kept under about 15 to 20 feet.